xrpm.co.nz

Engine Oil Sandwich Plate

Wed, 21 Mar 2012 12:04:20 +1300

">]]>

Engine oil sandwich adapter plate, low profile with pressure relief.

Includes 20 x 1.5mm Nut

Used so you can run lines to a remote oil cooler.

" border="0"> ]]>" border="0">

RCI Window Net 24x24

Wed, 21 Mar 2012 11:24:31 +1300

">]]>

Window net , black, 24" x 24"

SFI Approved

" border="0"> ]]>" border="0">

Mudd Off

Wed, 21 Mar 2012 11:08:38 +1300

">]]>

Mudd Off creates a non-stick shield that keeps mud, dirt and debris from sticking to your vehicle. Will not harm paint, plastics or metals. Environmentally safe. Reduces clean up time.

1 quart concentrate. Mix 12:1 with water to make 3 gallons.

" border="0"> ]]>" border="0">

Tilton Clutch Rebuild Kit

Wed, 08 Feb 2012 18:14:19 +1300

">]]>

Tilton centre springs (steel fingers) for the centre of your pressure plate.

Also includes mounting hardware (see pic)

To suit 7.25" Clutch

" border="0"> ]]>" border="0">

ALLOY 10MM BANJO TO -4

Wed, 01 Feb 2012 19:00:16 +1300

">]]>

Specifications
Angle	Straight
Colour	Blue
Construction	Aluminium
Size	10mm banjo, -4an

AF718-04

Alloy AN Banjo Fitting 10mm to -4AN
Available in Black, Silver or Blue Finish

" border="0"> ]]>" border="0">

ALLOY 8MM BANJO TO -3

Wed, 01 Feb 2012 18:56:35 +1300

">]]>

Specifications
Angle	Straight
Colour	Blue
Construction	Aluminium
Size	8mm banjo, -3an

AF717-03

Alloy AN Banjo Fitting 8mm to -3AN
Blue, Black or Silver Finish

" border="0"> ]]>" border="0">

Carter Electric Fuel Pump 14-16 PSI 100GPH

Fri, 20 Jan 2012 17:21:55 +1300

">]]>

Competition Series "Black" Fuel Pump features:

12V negative ground
100 Gallons per hour free flow
14-16 PSI operating pressure, use with a regulator
3/8" NPT Thread. Inlet & outlet fittings are on top for easier mounting & hose routing
Black Dichromate & Epoxy Coat finish for superior corrosion protection
Smaller and lighter than competitive pumps
No leak prone seal between motor and pump body
Liquid cooled motor - no armature burnout

" border="0"> ]]>" border="0">

Carter Electric Fuel Pump 6-8PSI 100 GPH

Fri, 20 Jan 2012 17:17:07 +1300

">]]>Competition Series "Silver" Fuel Pump features:

12V negative ground
100 Gallons per hour free flow
6-8 PSI operating pressure, No regulator
A true high flow pump with out plumbing hassles
3/8" NPT Thread. Inlet & outlet fittings are on top for easier mounting & hose routing
Silver & Black Dichromate for corrosion protection
Smaller and lighter than competitive pumps
No leak prone seal between motor and pump
Liquid cooled motor - no armature burnout
" border="0"> ]]>" border="0">

Holley Red Electric Fuel Pump 97GPH

Fri, 20 Jan 2012 17:04:13 +1300

">]]>Features
Tumble Polished Billet Look
New Lower Housing Casting for Enhanced Fuel Flow and Quieter Operation
Maximum Pressure Is 7 PSI
Motor Draws 2 Amps Current
7 1/2 Amp fuse recommended
Constant Fuel Flow with No Pulsation
Improved design for street/strip applications
Distinctive “RED” logo
Flows 97 GPH (free flow)
Flows 71 GPH at 4 PSI
Regulator is not required
Has externally accessible pressure relief valve (max 7 PSI)
Rotor/Vane pump design is more tolerant of contaminated fuels
Weighs only 2.88 lbs
Includes mounting bracket
Can be serviced from the pump end
NOT compatible with alcohol or methanol fuels

Not designed or recommended for use with fuel injection systems
" border="0"> ]]>" border="0">

Holley Black Electric Fuel Pump 140GPH

Fri, 20 Jan 2012 16:42:37 +1300

">]]>Features

Tumble polished billet look
New lower housing casting for enhanced fuel flow
Improved design for street/strip applications
Distinctive “BLACK” logo
Compatible with alcohol or methanol fuels
Flows 140 GPH (free flow)
Flows 120 GPH at 9 PSI
Maximum pressure is 14 PSI
3/8” NPT inlet and outlet ports
Fuel pressure regulator is required (Recommend Holley P/N 12-704 for gasoline & P/N 12-707 for alcohol)
Motor draws only 4 Amps current
7 1/2 Amp fuse recommended
Provides constant fuel flow with no pulsation
Has externally accessible pressure relief valve (max 14 PSI)
Rotor/Vane pump design is more tolerant of contaminated fuels
Weighs only 3 lbs
Includes mounting bracket
Repair kits are readily available
Can be serviced from the pump end
Use of safety shut-off switch, P/N 12-810, strongly recommended
Not designed or recommended for use with fuel injection systems

" border="0"> ]]>" border="0">

MSD STREET FIRE SPARK PLUG WIRES

Fri, 20 Jan 2012 16:38:46 +1300

">]]>

Street Fire Ignition Lead Set

Universal V8, 8mm, Black, 90° Plug Boots, Socket & HEI Distributor Cap

500 ohms per foot resistance for improved spark delivery and power

Helically wound conductor suppresses electro and radio noise

8mm silicone and synthetic jacket resists heat and abrasion

Silicone boots protect against high exhaust temps

The Street Fire Spark Plug Wires feature a low resistance conductor that's wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.

" border="0"> ]]>" border="0">

B&M MEGASHIFTER RHD

Fri, 20 Jan 2012 16:17:40 +1300

">]]>The Megashifter is one of B&M's all-time classic designs. B&M have sold more MegaShifters alone than some others have sold in their entiore line. The MegaShifter is one of B&M's most popular shifters due to it's timless good looks and high performance ratchet action. And it's ideally suited for most popular universal applications.

Dimentions: 12.98" Long, 12.61" High, 6.57" Wide

Suits the following transmissions:

GM Th-400, 350, 250, 200, 700R4 & 200-4R
GM Trimatic (with optional bracket kit)
Ford C4 & C6
Chrysler '66 & Later Torqueflite A727 & A904
" border="0"> ]]>" border="0">

Quicksilver Shifter

Fri, 20 Jan 2012 16:15:50 +1300

">]]>B&M Quicksilver Shifter
Part Number# BM80683

You want style and stout performance wrapped up in a classic package? The B&M QuickSilver shifter is your answer. This top of the line ratchet action shifter provides performance shifting without a trigger. To get into park or reverse from drive, just lift the knob/stick assembly and move it forward into position. And it's cable operated for easy installation and precise shifting.

Dimentions: 12.22" Long, 12.23" High, 6.21" Wide

Suits the following transmissions:

GM Th-400, 350, 250, 200, 700R4 & 200-4R
GM Trimatic (with optional bracket kit)
Ford C4 & C6
Chrysler '66 & Later Torqueflite A727 & A904
Includes all mounting hardware and cable.
" border="0"> ]]>" border="0">

AEROFLOW Y-BLOCK -8 MALE TO -6 MALE X2

Thu, 19 Jan 2012 19:36:47 +1300

">]]>AEROFLOW Y BLOCK -6 M/-6 M TO -8 M
" border="0"> ]]>" border="0">

AEROFLOW Billet Y Block 3/8"

Thu, 19 Jan 2012 19:07:17 +1300

">]]>Billet Y-Block with 1/8" NPT Port - 3/8" to 3/8"
" border="0"> ]]>" border="0">